2017年8月19日星期六

How unlock iOS Passcode? use Passcode Brute-force tool?

when you meed iso passcode lock programmer, you maybe need an effective solution of iOS Passcode removal, by using these Passcode Brute-force tools for passcode brute-force attack. as a matter of fact, IP-Box V3 is an top tool for supporting passcode bruteforce cracking on the iPhone 7 and 7 Plus running iOS 10

If you wnat to repair your moible phone unlock, started to use special brute-force tools, Quite easy way to get and remove forgotten 4-digit / 6 digit passcode from iOS device, while the phone data remains intact. Brute-force tools can be used with any iPhone running iOS 10 or newer (later) version of iOS.


New apple Password Unlock Tool for iPhone 7 7plus, crack the forgotten screen password (4 or 6 digit) on iphone 7/7plus iSO 11/10, one unlocker can working with 3pcs iphone (7/7p) at together.

Please keep in mind that this is a time consuming method.  and can't crack the passcode in fast speed

Built on the success of the original IP-Box, the new IP-Box V3 now supports passcode bruteforce cracking on the iPhone 7 and 7 Plus running iOS 10, This method will keep all data intact once the passcode has been cracked, but can take long amounts of time depending on the length of the pass code.t this is a time consuming method.  and can't crack the passcode in fast speed

Brute-force tools comparison table:


Brand
iOS 7.0.0 - 7.1.2
iOS 8.0 - 8.1
Display (to read out the unlock code)
Sound signal notification about unlock
Phone charging
Standalone
Software
Manual
IP-BOX (iOS 7)
+
+ (adapter required)
+
+
+/- (Depends on the package content)
PC required
+
-
MFC Dongle
+
+ (adapter required)
-
-
+/- (Depends on the package content)
PC required
+
+
Miracle Black Box
+
-
+
+
+
+
-
-
IP-BOX 3 (iOS 10.**)
+
+(adapter required)
-
-
+
PC required
+

2017年8月14日星期一

Forgot iphone 7 / 7plus Screen Passcode? How to Unlock It?

IP-BOX V3 is for  the iphone 7/7P/6s/6/5S/5 Screen Passcode unlock tool, ,  iphone 7 / 7plus Screen Passcode unlock tester is an intelligent tool which can unlock three iphone devices at same time, no need for phone disassembly


All intelligent phone passcode unlock tools, no need to disassemble the iPhone, it can unlock three iPhone simultaneously with one unlock tool, and it works independently and non-interference with each other, 100% for unlock 4 digit password, 80% for unlock 6 digit password, it search can search 20000 common passwords, unlock iPhone 7/7P tools sets windows PE System automatic Recognition and Optical technology of millisecond 0 error in one, about 40 seconds for unlock simple 6 digit password, Weak password less than 20,000 groups

Remark: This Password Unlock tool is only for testing and study, Otherwise accept the consequences by yourself if violate the state laws in your country, just sell to Cell phone repair service shop, it is the professional-grade iPhone 7/7 Plus Password unlock tool.

2017年8月8日星期二

Ten steps To fix the Iphone 7/7P Home Button

when you Iphone 7/7P Home Button is not working, how can we do? when your home button failures to respond when you press on it, thats mean your iphone home button have some trouble and need it to repair. if in this situation, nandrepair  think this article might hlep you that provide with a fast way to get rid of the trouble of home button or named home/Touch ID sensor assembly.

1. Power off your iPhone before disassembly.
2. Dismantle the display assembly. Opening the iPhone’s display will compromise its waterproof seals. Take extra care not to expose your iPhone to liquid damage after completing your repair. As for the way of dismantling the display assembly,you can search through the internet or visit here for help.
3. Remove the four Y000 screws securing the bracket over the home/Touch ID sensor: One 1.1 mm screw; three 1.3 mm screws.
4. Remove the bracket that secures the home/Touch ID sensor.
5. Lift the home button connector to the right to disconnect it from its socket on the interconnect cable.
6. Gently move the home button interconnect cable out of the way of the home button cable. Don’t try to detach the press connector completely—simply lift it up so that it is out of the way when removing the home/Touch ID sensor cable.
7. Flip the display assembly over, and apply a warm iOpener to the home/Touch ID sensor area for about 90 seconds. This will also help soften the adhesive holding the delicate sensor cable in place. A hot Air gun or hair dryer proved to be much more convenient and is a time savior. You can heat more and the glue becomes more fluid make the next steps with the opening picks much easier.
8. Use an opening tool pick to gently separate the adhesive holding the home/Touch ID sensor cable to the back side of the display panel.
9. Remove the old home/Touch ID sensor assembly.
10. Reinstall the new one in reverse order.
Replacing home button is a relatively complex operation requiring your patience and carefulness, and what is worth noting is that in most cases replacing the sensor with a new one will cause the loss of fingerprint sensor functions, but if properly handled, it can be good as new, Touch ID and all.

2017年8月4日星期五

IP-box V3 iPhone Passcode Unlock Tool for iPhone 7 / 7Plus

New IP-BOX V3 is professional iPhone Passcode cracking Tool, it is used to crack any forgotten 4 or 6 digit password on iPhone with iOS 11/10. The intelligent unlock tool can be available for three iphone devices at same time, no need for phone disassembly. The latest firmware R10-6000 Version not only supports English interface, but also support iphone 7/7plus iOS 11/10 and iOS 7.12 of iPhone 4 to 5S,  iPhone 6/6s function will be added in future.



100% rate for unlocking 4 bit password, and 80% rate for 6 bit password, the equipment will run less than 20 thousand groups common weak password to successfully unlock password. It adopts windows PE, automatic system identification + optical technology to achieve millisecond zero error. For 6 bit weak password, the equipment runs more than 40 seconds for one group, less than 20 thousand group for weak password.

Just simply attach the device to your iPhone,  it will give you the passcode in some hours. You will then have full access to your iPhone, and all user data remains intact.




Please note the following tips when you using the device!!

1. When unlocking the iOS device, please keep the battery work, choose the Save Data option when Re-Store the iPhone by Re-Flash software.
2. Please choose the special Password by the software,  don't scan the password from 000000 to 999999, it will take very long time. And choose "delete" the firmcache file when re-store the iPhone.


IP-Box V3 Update Firmware (Software)

https://drive.google.com/file/d/0BzMEvK0bAD0ed3NxNzRNZlVYblU/view?usp=sharing



Software SETTING: 

Stop while the brightness changes 150
Each time interval bit (ms) 40
Each group of data interval (ms) 300